Follow

How do you place the A 200 p into operation on a computer?

Firstly, connect the A 200 p to your computer. When doing so, use the longest of the three cables supplied which ends in a type-A USB plug. Then boot up the computer. The drivers are loaded automatically after start-up.

It is not necessary to install special device drivers, as the standard drivers are used. It may then be necessary to restart you computer.

Depending on which operating system you are using, it may be necessary to carry out further steps:

Microsoft operating systems (e.g. Windows Vista, Windows 7 or Windows 8)

If you are using a Microsoft operating system and you can’t hear any sound after you have carried out the previous steps, then select the A 200 p as the playback device under Start / Control Panel / Sound / Playback.

Apple Mac OSX operating system

If you are using the Apple Mac OSX operating system and you can’t hear any sound after you have carried out the previous steps, then shut  your computer down. Restart it and, during the startup process, keep pressing the "alt + cmd + p + r" keys simultaneously until you hear a sound.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk